Have you been working on some cool DIY projects? You might be wondering how to drill a hole in glass without breaking it. This is a cool hack if you want to make unique decorations on vases or drill an outlet for water in planters among other things.
Luckily, with the right tools, you can drill a hole through glass in just a few minutes. We’ll go over that process step-by-step. You can also check out the video below.
Table of Contents
When drilling a hole through glass without breaking it, the hole should be at least an inch from the edge. Use a hole-cutting drill bit for the best results. First, make a template with scrap wood and drill a hole into the wood. Use the template to help keep the drill stable as you make the hole in your glass. Pour some water on the glass while drilling so it doesn’t get too hot.
You can use any standard power drill to drill holes through glass. The most important thing to have is the diamond-coated or carbide drill bits.
Learn more about the full process below. This technique works for many fragile surfaces like mirrors, ceramic tiles, plant pots, and more.
You’ll line this up against the glass and use it as a template for drilling your hole later. You can use your hole-cutting drill bits for this step.
You just want to test and make sure the hole cutting bit will fit smoothly through the template. You don’t want to force it through because you could break the glass.
If it doesn’t fit, sand the hole larger or use a wood file. Here’s a wood file you can try out from Amazon.
You can also use a sponge to apply water as you drill. It can be difficult to multitask while drilling though. You might want a friend’s help.
When drilling, you’ll open the cap to release the water onto the glass.
This will protect your floor in case you drill through the glass.
The water should pour onto the glass and template.
The masking tape gives the drill some traction so you can comfortably drill a clean hole. It also protects you from getting cut if the glass cracks.
Depending on the glass thickness, this may take up to a minute. Rock the drill bit back and forth slightly to help cut the glass.
Use the template to get the hole started. After about a few seconds (depending on the thickness of the glass), remove the template.
The process takes some practice, so you may want to try it on some scrap glass first.
Make sure the water is hitting the glass while you’re drilling. Otherwise, the drill bit will get incredibly hot and the heat may warp the glass.
Drill bits with diamond or carbide tips are best to drill glass cleanly and efficiently. These durable materials penetrate glass easily without needing much force. This reduces the risk of breaking glass while drilling a hole through it.
It can take anywhere from 10 seconds to about a minute to drill through glass with a new drill bit. If you have an older or dull drill bit, the process can take several minutes. It’s important to be patient. Avoid applying pressure to rush the process, because the glass can break easily.
Yes, you can use a Dremel drill on glass as long as the drill bits are diamond or carbide tipped. Make sure to apply water as you drill so the bits don’t get hot. They can get hot enough to burn your skin, so use caution.
Hopefully you found our article on drilling a hole through glass helpful. For more practical DIY guides, check out the articles below!
Spraying Paint vs. Rolling Paint – Which is better and why?
How to Organize a Kitchen for Maximum Efficiency
Patio Heater Won’t Stay Lit – Here’s How to Fix It
Drill bits with diamond or carbide tips are best to drill glass cleanly and efficiently. These durable materials penetrate glass easily without needing much force. This reduces the risk of breaking glass while drilling a hole through it.
It can take anywhere from 10 seconds to about a minute to drill through glass with a new drill bit. If you have an older or dull drill bit, the process can take several minutes. It’s important to be patient. Avoid applying pressure to rush the process, because the glass can break easily.
Yes, you can use a Dremel drill on glass as long as the drill bits are diamond or carbide tipped. Make sure to apply water as you drill so the bits don’t get hot. They can get hot enough to burn your skin, so use caution.
When it comes to creating the ultimate outdoor cooking haven, selecting the right range hood…
When it comes to upgrading or customizing your kitchen, selecting the right range hood is…
Ensuring proper ventilation in your kitchen is crucial for maintaining good indoor air quality. Studies…
Outdoor kitchens are the ultimate oasis for culinary enthusiasts, offering a chance to break free…
When it comes to outdoor kitchens, the question of whether a vent hood is necessary…
After a lot of hard work to find the best range hood for you, it…
This website uses cookies.